Introduction
The E220R is a 4U rack mount server.
Tested Configurations
Aurora Version |
Configuration |
Remarks |
Reporter |
2.99 |
CPU: 2 x 450MHz UltraSPARC II, RAM: 2GiB, Other: Texas Instruments TVP4020 [Permedia 2] Video Card, pci quad ethernet card |
Works |
Detailed Specifications
Processor |
|
Number |
Up to two |
Architecture |
360- or 450-MHz UltraSPARC[tm]-II |
Memory management |
MMU with 64 I-TLB entries and 64 D-TLB entries, 8192 hardware-supported contexts |
Cache memory |
16-KB data and 16-KB instruction on chip per processor |
4-MB external per processor |
|
UPA Speed |
112.5 MHz |
Main Memory |
|
Capacities |
16 DIMM module slots |
|
Install SIMMs in sets of four. 64-, and 128-MB DIMM expansion |
|
128 MB to 2 GB total memory capacity (with 128-MB DIMMs, in pairs) |
Memory type |
60-ns memory modules |
Datapath |
576 bits wide |
Standard Interfaces |
|
Ethernet |
One ethernet/fast ethernet (10BASE-T/100BASE-T) twisted-pair standard connector (RJ-45) or one MII for external transceiver connection |
Keyboard and mouse |
One standard keyboard/mouse port (mini DIN-8) |
Parallel |
One Centronics compatible parallel port (DB25); ECP mode capable |
PCI |
Four full-size slots compliant with PCI specification version 2.1: |
* One slot operating at 33- or 66-MHz, 32- or 64-bit data bus width, 3.3 volt |
|
* Three slots operating at 33 MHz, 32- or 64-bit data bus width, 5 volt |
|
SCSI |
One 40MB/sec, 68-pin ,Ultra SCSI (SCSI-3), 2 channels (synchronous) |
Serial |
Two RS-232C/RS423 serial ports (DB25) |
Internal Mass Storage |
|
Disks |
Up to two 3.5-x 1-in or x 1.6-in. hot-pluggable disks; 9.1-GB, 18.2-GB, or 36.4-GB |
CD-ROM/DVD-ROM |
32x 644-MB SCSI CD-ROM |
10X DVD-ROM |
|
Tape |
Optional 12-to 24-GB DDS-3 4mm; 20-to 40-GB 8-mm |
Environment |
|
AC input |
100 - 240 VAC, 47 - 63 Hz, 6.3 A(max) |
Input power |
610 W |
Heat output |
2080 BTU/hr |
Temperature1 |
Operating: 5° C to 35deg; C (41deg; F to 95deg; F) |
Nonoperating: -20deg; C to 60deg; C (-4deg; F to 140deg; F) |
|
Humidity |
Operating: 20% to 80% relative humidity, noncondensing |
Nonoperating: 5% to 93% relative humidity, noncondensing |
|
Altitude |
Operating: 3000 m (10,000 ft.) |
Nonoperating: 12,000 m (40,000 ft.) |
|
Vibration |
Operating: 0.2G peak, 5 - 500 Hz (swept sine) |
0.0002 G2/Hz, 5 - 500 Hz (random) |
|
vertical axis only (castered configuration), vertical and horizontal axes (foot glide configuration) |
|
Nonoperating: 1G peak, 5 - 500 Hz (swept sine) |
|
0.002 G2/Hz, 5 - 500 Hz (random) |
|
3 perpendicular axes |
|
Shock |
Operating: 4G peak, 11 milliseconds half-sine pulse |
Nonoperating: 15G peak, 11 milliseconds half-sine pulse |
|
Number of Cords |
1 per power supply; 2 (max) |
Regulations |
|
Meets or exceeds the following requirements: |
|
Safety |
UL 1950, UL Canada C22.2 No. 950, TUV EN 60950, UL CB Scheme to IEC 950 with full deviations |
RFI/EMI |
FCC Class A, DOC Class B, VCCI Class A, EN 55022 Class B |
Immunity |
EN 50082-1 |
X-ray |
DHHS 21 Subchapter J; PTB German X-ray Decree |
Dimensions and Weights |
|
Height |
17.8 cm (7.0 in.) |
43.8 cm (17.25 in.) shipping |
|
Width |
43.8 cm (17.25 in.) |
60.02 cm (23.63 in.) shipping |
|
Depth |
69.2 cm (27.25 in.) |
93.98 cm (37.0 in.) shipping |
|
Weight |
29.5 kg (65 lb.) |
38.6 kg (85 lb.) shipping |
|
Power cord |
1.99 m (6.56 ft.) |
Clearance and Service Access |
|
Front1 |
91.4 cm (36 in.) |
Rear1 |
91.4 cm (36 in.) |
Right1 |
91.4 cm (36 in.) |
Left1 |
91.4 cm (36 in.) |
Top1 |
91.4 cm (36 in.) |
Rack Mounting |
|
Fits into a standard commercial 19-inch wide, 36-inch deep rack |
|